L S Starrett BEARING COMPANY

SKF 6213 Bearing

 

Drill Rod Bearings

To provide a longer stroker crank that has more strength than the stock VW forging or any other aftermarket forged crankshaft, the 411 center main journal is required. For that reason all of the "Berg" forged cranks are made with the 411 center main to provide a stronger cross sectional area at the center journal. To maintain proper case strength, I use a special adapter bearing (GB 157) that fits the stock case and this larger crankshaft main journal. It is a steel backed bearing, as was the one it replaced, leaving the regular (steel back) split #2 main bearing as an extra. Gary, has been installing these split #2 bearings in the #3 location for years on all engines that use a 411 center main bearing crankshaft, having the round #3 bearing as the leftover. This requires adding a dowel hole in the other half of most cases at the #3 location so it will accept the dowel. A few cases have this dowel hole from the factory, but it is likely you will need to add the hole. Gary made a drill fixture by drilling through the pin hole in an old #2 split bearing, installing that bearing in the case and drilling a pin hole about a 1/4" deep into the case at the #3 location.
Extremely simple! This provides much stronger case and crankshaft support when using the split steel backed bearings in both #2 and #3 locations. Furthermore, it is no longer necessary to remove or replace the cam/distributor drive gears from the crankshaft when working on the engine or changing main bearings. See LA CASE030 for adding dowel hole.

Precision Brand 28054 Drill Rod Bearings
Precision Brand 28054 Drill Rod Bearings
-30 to +120 &de
Needle Roller/A
Precision Brand 28074 Drill Rod Bearings
Precision Brand 28074 Drill Rod Bearings
1.3120 in
.6560 in
Precision Brand 28072 Drill Rod Bearings
Precision Brand 28072 Drill Rod Bearings
2.1250 in
1/2-20 in
Precision Brand 28073 Drill Rod Bearings
Precision Brand 28073 Drill Rod Bearings
Open Type
6.5 Inch
Precision Brand 28068 Drill Rod Bearings
Precision Brand 28068 Drill Rod Bearings
1.7311 in
Hardened Alloy Steel
Precision Brand 28067 Drill Rod Bearings
Precision Brand 28067 Drill Rod Bearings
Steel
3.98 lbs
Precision Brand 28064 Drill Rod Bearings
Precision Brand 28064 Drill Rod Bearings
Oil-Impregnated Bron
Click here
Precision Brand 28060 Drill Rod Bearings
Precision Brand 28060 Drill Rod Bearings
120 mm
SPBL
Precision Brand 28056 Drill Rod Bearings
Precision Brand 28056 Drill Rod Bearings
Without Snap Ring
31 mm
Precision Brand 28055 Drill Rod Bearings
Precision Brand 28055 Drill Rod Bearings
Normal Duty
Grip Tight Ball Bearing
Next page ▸
All Products Contact Now
Product Categories
Cored Bar Stock
Die & Mold Plain-Bearing Bushings
Drill Rod Bearings
Flat Bar Stock Bearings
Keystock Bearings
Plain Sleeve & Flanged Bearings
Plain Sleeve Thrust Washers
Solid Bar Stock Bearings
Spherical Plain Bearings
Take-Up Ball Bearing Units
Take-Up Roller Bearing Units
Wear Strips & Wear Plates
ntn 6206z Bearing
sy510 Bearing
uj10430 Bearing
skf h316 Bearing
Bearing Slewing Ring
Large Slewing Bearings
Slewing Ring Bearings
Kaydon Slewing Bearing
Super Precision Bearing
Super Precision Angular Contact Bearings
Super Precision Bearings
Slewing Ring
Tapered Roller Bearings
Four-Row Tapered Roller Bearing
Cylindrical Roller Bearing
Double Row Tapered Thrust Roller Bearings
Railway Rolling Spherical Roller Bearings
Angular Contact Ball Bearings
Ribbed Belts
Gates Poly Chain Gt Carbon
T215rb Belts
Powerband Belt
Gates Racing Timing Belt