Plain Sleeve Thrust Washers
It is manufactured using the powdered metal process with the purest metal powders. This process ensures the uniform distribution of pores between the bronze particles which absorb the oil by capillary action. In addition, Bost-Bronz® has a self-contained oil supply (approximately 20% by volume) which provides a uniform protective film over the entire bearing surface. As a result, bearings are one of the most effective bearings available for precision performance.
bearings are also highly versatile and can be used for production and replacement requirements throughout general industry. They have proven to be efficient under heavy loads at moderate speeds, as well as under light loads at high speeds. In addition, they are ideally suited for applications where normal lubrication is difficult or impossible to provide.
- Oilite TT705-03 Plain Sleeve Thrust Washers
- 44.1 mm
- 4 mm
- Oilite TT2600- Plain Sleeve Thrust Washers
- 16.9 mm
- 1,220 kN
- Oilite SOT1205-01 Plain Sleeve Thrust Washers
- 12.7 mm
- 94 mm
- Oilite TT4002-01 Plain Sleeve Thrust Washers
- 32.8 kN
- 25.4 mm
- Symmco ST-66128-4 Plain Sleeve Thrust Washers
- 75.5 mm
- 2 Seals
- Symmco ST-88124-8 Plain Sleeve Thrust Washers
- 3.2 Nm
- 63.5 mm
- Oilite TT1001-02 Plain Sleeve Thrust Washers
- EPR 12
- LOR 82
- Oilite TT1002- Plain Sleeve Thrust Washers
- B04144
- 46 mm
- Oilite SOT1502-02 Plain Sleeve Thrust Washers
- 0.72
- 6.5 mm
- Symmco ST-2148-2 Plain Sleeve Thrust Washers
- 11.5 Nm
- 45 mm
- Oilite SOT1001-01 Plain Sleeve Thrust Washers
- 19.5 mm
- 150 mm
- Oilite TT1502- Plain Sleeve Thrust Washers
- 26.91 mm
- N/A