Plain Sleeve Thrust Washers
It is manufactured using the powdered metal process with the purest metal powders. This process ensures the uniform distribution of pores between the bronze particles which absorb the oil by capillary action. In addition, Bost-Bronz® has a self-contained oil supply (approximately 20% by volume) which provides a uniform protective film over the entire bearing surface. As a result, bearings are one of the most effective bearings available for precision performance.
bearings are also highly versatile and can be used for production and replacement requirements throughout general industry. They have proven to be efficient under heavy loads at moderate speeds, as well as under light loads at high speeds. In addition, they are ideally suited for applications where normal lubrication is difficult or impossible to provide.
- Oilite TT2101-01 Plain Sleeve Thrust Washers
- 22.2 mm
- 20mm
- Oilite TT4002- Plain Sleeve Thrust Washers
- 75 mm
- 41 mm
- Oilite TT2008- Plain Sleeve Thrust Washers
- 200 °C
- PAE205-
- Oilite SOT710-02 Plain Sleeve Thrust Washers
- 14.9 kg
- -20 °C
- Oilite TT2400-01 Plain Sleeve Thrust Washers
- 30 mm
- 11.2 kN
- Oilite TT801- Plain Sleeve Thrust Washers
- T206-
- 8 Nm
- Oilite TT2402- Plain Sleeve Thrust Washers
- 51.6 mm
- 49.21 mm
- Oilite SOT2006-01 Plain Sleeve Thrust Washers
- 1.97 kg
- 9 mm
- Oilite TT3001-03 Plain Sleeve Thrust Washers
- 14 kN
- UC205-15G2
- Oilite TT1709-01 Plain Sleeve Thrust Washers
- 166 mm
- 2 mm
- Symmco ST-66128-8 Plain Sleeve Thrust Washers
- NTN
- 21.54 mm
- Oilite SOT2001- Plain Sleeve Thrust Washers
- 16.8 Nm
- 1.54 kg