| Bunting Bearings, LLC AA1512-12 Plain Sleeve & Flanged Bearings | s1:21.45 mm; A1:12 mm; B:42.9 mm; P:230 mm; A2:30 mm; Recommended tightening torque for set screw:8 Nm; H:102 mm; Designation of housing:T207-; H2:64 mm; N:22mm; |
| Bunting Bearings, LLC FF161801 Plain Sleeve & Flanged Bearings | Category:Single Row Ball Bear; Min operating temperature, Tmin:-60 °C; Mass:0.01 kg; Noun:Bearing; Rolling Element:Ball Bearing; Minimum Buy Quantity:N/A; Brand:NTN; Maximum Capacity / Filling Slot:No; f0:12.5; Fatigue limit load, Cu:0.06 kN; |
| Bunting Bearings, LLC EP071016 Plain Sleeve & Flanged Bearings | T max.:200 °C; SW:4.76 mm; Recommended tightening torque for set screw:16.8 Nm; B1:71.3 mm; G:3/8-24UNF; B2:20.7 mm; S:27.7 mm; T min.:-20 °C; d:55.56 mm; Weight:1.36 kg; |
| Bunting Bearings, LLC AA1212-11 Plain Sleeve & Flanged Bearings | G:R1/8"; Designation of bearing:UC209-27G2; J:148.5 mm; Designation of open end cover:SCOU209-27; C0:20.8 kN; B:49.2 mm; Recommended tightening torque for set screw:8 Nm; N:14mm; e:24 mm; L:111 mm; |
| Bunting Bearings, LLC CB121410 Plain Sleeve & Flanged Bearings | Radial clearance class:C3; Characteristic outer ring frequency, BPF0:6.24 Hz; D4 max:91.6 mm; Snap ring reference:R85; b max:2.2 mm; ra max:1 mm; rNa max:0.6 mm; E:76.5 mm; Dynamic load, C:64.8 kN; Max operating temperature, Tmax:120 °C; |
| Bunting Bearings, LLC EP283248 Plain Sleeve & Flanged Bearings | rs min:1 mm; da min:50 mm; Nlim (oil):11,000 rpm; Characteristic cage frequency, FTF:0.43 Hz; ra max:1 mm; Nlim (grease):9,200 rpm; Characteristic rolling element frequency, BSF:6.73 Hz; f0:15.3; Dynamic load, C:21 kN; D:75 mm; |
| Bunting Bearings, LLC FF101501 Plain Sleeve & Flanged Bearings | H2:51 mm; B1:43.5 mm; d1:32.4 mm; d:15 mm; H1:76 mm; C0:6.65 kN; S:17 mm; A5:17 mm; B:34 mm; A1:12 mm; |
| Bunting Bearings, LLC EF050806 Plain Sleeve & Flanged Bearings | Brand:NTN; Characteristic outer ring frequency, BPF0:5.12 Hz; Radial clearance class:CN; d:40 mm; Characteristic rolling element frequency, BSF:6.66 Hz; Characteristic inner ring frequency, BPFI:6.88 Hz; B:15 mm; da min:45 mm; Characteristic cage frequency, FTF:0.43 Hz; ra max:1 mm; |