| Bunting Bearings, LLC FFB68-5 Plain Sleeve & Flanged Bearings | B:90.00 mm; Fillet Radius ra:2.50 mm; d:95.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3200 rpm; Basic Static Radial Load Rating Co:325000 N; Basic Dynamic Radial Load Rating C:291000 N; D:200.0000 mm; Grease Speed Rating n1:2500 rpm; |
| Bunting Bearings, LLC CB202414 Plain Sleeve & Flanged Bearings | Designation of housing:F206N-; L:108 mm; Z:27.3 mm; N:12mm; e:18 mm; J:83 mm; A1:13 mm; C:19.5 kN; T min.:-20 °C; T max.:200 °C; |
| Boston Gear FB35-2 Plain Sleeve & Flanged Bearings | Characteristic inner ring frequency, BPFI:7.92 Hz; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:2.1 kN; Mass:1.02 kg; d:90 mm; Characteristic rolling element frequency, BSF:7.49 Hz; rs min:1.5 mm; f0:15.6; da min:98 mm; B:24 mm; |
| Bunting Bearings, LLC AA1212-11 Plain Sleeve & Flanged Bearings | G:R1/8"; Designation of bearing:UC209-27G2; J:148.5 mm; Designation of open end cover:SCOU209-27; C0:20.8 kN; B:49.2 mm; Recommended tightening torque for set screw:8 Nm; N:14mm; e:24 mm; L:111 mm; |
| Bunting Bearings, LLC AA1049-18 Plain Sleeve & Flanged Bearings | L1:225 mm; SW:2.38 mm; A5:16 mm; Recommended tightening torque for set screw:3.2 Nm; A:21 mm; S:6 mm; C:9.55 kN; Weight:1.6 kg; L:264 mm; Designation of housing:SP203-205/40N-; |
| Bunting Bearings, LLC EP243032 Plain Sleeve & Flanged Bearings | Nref:8,300 rpm; dc min:50 mm; Dynamic load, C:49.1 kN; F:44 mm; Fatigue limit load, Cu:5.9 kN; da min:41.5 mm; Max operating temperature, Tmax:120 °C; Radial clearance class:CN; Characteristic outer ring frequency, BPF0:5.7 Hz; rs min:1.1 mm; |
| Bunting Bearings, LLC FF070703 Plain Sleeve & Flanged Bearings | d:15 mm; ra max:0.6 mm; Fatigue limit load, Cu:0.16 kN; Da max:31 mm; B:11 mm; Dynamic load, C:7.75 kN; Max operating temperature, Tmax:180 °C; Characteristic outer ring frequency, BPF0:2.61 Hz; Min operating temperature, Tmin:-30 °C; da max:20 mm; |
| Bunting Bearings, LLC CB081608 Plain Sleeve & Flanged Bearings | L:175 mm; s1:30.5 mm; C:62 kN; A:48 mm; Designation of housing:F310-; T max.:200 °C; e:28 mm; A2:67 mm; Recommended tightening torque for set screw:27.1 Nm; J:132 mm; |