| Oilite CC-1504 Cored Bar Stock | Weight / Kilogram:0.23; Brand:SKF; Product Group:B00234; Inventory:0.0; Bearing number:VKBA 713; Compatibility:HYUNDAI / PONY / en; Category:Bearings; Designation SX:CX095; Designation SNR:R173.00; Designation FAG:713619100; |
| Symmco SCS-3244-6 Cored Bar Stock | r1,2 min.:1 mm; Mass bearing:0.94 kg; Limiting temperature - T:350 °C; d1:69.06 mm; s1:33.4 mm; Grub (set) screw - G2:M10x1; Hexagonal key size for grub screw - H:5 mm; Width (mm):55,6; Basic dynamic load rating - C:43.6 kN; Weight / Kilogram:0; |
| Oilite CC-2203 Cored Bar Stock | Width (mm):37,000; Bearing number:6413; Size (mm):65x160x37; d:65,000 mm; D:160,000 mm; C:37,000 mm; Bore Diameter (mm):65,000; B:37,000 mm; Brand:NTN-SNR; Outer Diameter (mm):160,000; |
| Bunting Bearings, LLC B954C040064 Cored Bar Stock | Calculation factor - fHC:1; da max.:37.2 mm; Limiting speed for grease lubrication:32000 r/min; Preload class A GA:50 N; Attainable speed for grease lubrication:32000 r/min; D2:49.57 mm; ra - max.:1 mm; Preload class A:30 N/micron; Da max.:50.4 mm; Brand:SKF; |
| Bunting Bearings, LLC SSC 3801 Cored Bar Stock | B - Cone Width:1.4219 in; T1 - Bearing Width:1.4375 in; Design Units:Imperial; Y - ISO Factor9:1.26; C - Cup Width:1.0313 in; G2 - Heat Generation Factor (Rib-Roller End):41.7; Aa - Cage-Cone Backface Clearance:0.16 in; R - Cone Backface To Clear Radius1:0.14 in; C1 - Cup Flange Width:0.2500 in; Bearing Weight:6.3 lb; |
| Oilite CC-4504 Cored Bar Stock | (Grease) Lubrication Speed:1 000 r/min; Outer Diameter (mm):580; B:92 mm; r min.:5 mm; Bore Diameter (mm):320; Basic dynamic load rating (C):1 600 kN; Bearing number:NU264; Brand:NTN; Size (mm):320x580x92; d:320 mm; |
| Bunting Bearings, LLC B954C032048 Cored Bar Stock | Outer Diameter (mm):72; Brand:FAG; D:72 mm; Bearing number:521760; Width (mm):28; d:30 mm; Size (mm):30x72x28; B:28 mm; Bore Diameter (mm):30; |
| Bunting Bearings, LLC ET1028 Cored Bar Stock | r:1,5 mm; Aa:0,7 mm; d:127 mm; da:134 mm; B:26,195 mm; D:180,975 mm; T:25,4 mm; Calculation factor (e):0,33; a:2,5 mm; Factor (Cg):0,0446; |