| Bunting Bearings, LLC B932C009011 Cored Bar Stock | D:32 mm; Weight:0,038 Kg; Fw:25 mm; Outer Diameter (mm):32; C:20 mm; Size (mm):25x32x20; Basic static load rating (C0):24,6 kN; Brand:Timken; Basic dynamic load rating (C):16,2 kN; Bore Diameter (mm):25; |
| Oiles 25S-4972 Cored Bar Stock | Width (B):49.0000; Standard Clearance:C0; Bearing Type:Shielded; Radius (min) (rs):3.000; Outer Diameter (mm):225; Outer Dia (D):225.0000; Min. Housing Shoulder Dia., Outer (Uo):212.000; Width (mm):49; Size (mm):105x225x49; Bore Diameter (mm):105; |
| Oilite CC-2003 Cored Bar Stock | r3,4 - min.:1 mm; Ball diameter Dw:22.225 mm; Bore Diameter (mm):210; Preload class A:364 N/micron; Da max.:201 mm; Static axial stiffness, preload class A:364 N/µm; Outer Diameter (mm):140; D2:193.1 mm; Static axial stiffness, preload class B:477 N/µm; Calculation factor (single, tandem) Y0:0.38; |
| Oiles 30S-3570 Cored Bar Stock | F:263 mm; Bore Diameter (mm):230; Bearing number:230RJ92; Brand:Timken; d:230 mm; D:420 mm; r max:3 mm; E:387 mm; Outer Diameter (mm):387; B:139 mm; |
| Oiles 25S-83108 Cored Bar Stock | ra max:1 mm; Da max:74.5 mm; Dynamic load, C:11.1 kN; Preload level:7; Brand:SNR; D:80 mm; Fatigue limit load, Cu:0.46 kN; d1:59.7 mm; d2:57.4 mm; Outer Diameter (mm):80; |
| Oiles 36S-3951 Cored Bar Stock | ra1 (max):2 mm; Limiting Speed - Oil:5,300 rpm; dc (min):79 mm; Limiting Speed - Grease:4,300 rpm; d:60 mm; Bore Type:Cylindrical Bore; r1:2.1 mm; Fillet Radius/Chamfer:2.1 mm; Radial Clearance:0.060 to 0.090 mm; ra (max):2 mm; |
| Symmco SCS-2036-6 Cored Bar Stock | T:36,512 mm; Static load, C0:228 kN; d1:100 mm; Basic static load rating (C0):228 kN; C:26,988 mm; r1a max:3.3 mm; Characteristic cage frequency, FTF:0.44 Hz; Outer Diameter (mm):127; Bearing number:4T-HM813842/HM813810; Db:121 mm; |
| Bunting Bearings, LLC B954C036048 Cored Bar Stock | C0 - Static Load:113000 lb; Y1 - Geometry Factor:2.85; Y2 - Geometry Factor:4.24; C - Dynamic Load (Basic):97700 lb; Dimension G:5.5000 in; Pre Install Clearance Min:0.0043 in; Grease Lubrication - M/N Seal:1200 rpm; Dimension C:4.9 in; Dimension F:16.75 in; Dimension D Min:12.50 in; |