| No. | Brand | d | D | c | B | C | l | A | m |
| 67885DW, 67820,67820CD | - | 3/8 in | 1/2 in | - | - | - | - | - | - |
| M 255449 D/410/410 D | - | 1/2 in | 11/16 in | - | 9/16 in | - | - | - | - |
| T441 | - | - | 8-1/8 in | - | 4-17/32 in | - | - | - | - |
| 332/334 | - | 130 mm | 230 mm | - | 64 mm | - | - | - | - |
| HM261049DW | - | 35 mm | 72 mm | - | 23 mm | - | - | - | - |
| LM 451349 DW/10/10 D | - | 120 mm | 200 mm | - | 62 mm | - | - | - | - |
| HM266449 | - | - | 78 mm | - | - | - | - | - | - |
| T511 A | - | 110 mm | 160 mm | - | 20 mm | - | - | - | - |
| NU 2368 FR | - | 1.438 Inch | 36.525 Millimeter | 2.75 Inch | 69.85 Millimeter | - | - | - | - | - | - |
| 2077144 | - | 10 mm | - | - | - | - | - | - | - |
| 239/710CAKW33 | - | 1.0000 in | - | - | - | - | - | - | - |
| GE240ES 2RS | - | 5 mm | 16 mm | - | 5 mm | 5 mm | - | - | - |
| 771/500 | - | 2.6875 in | 5.3000 in | - | 8.7500 in | - | - | - | - |
| 690RX2966CF1 | - | 35 mm | 4.6875 to 5.3125 in | - | 1.6875 in | - | - | - | - |
| 29432 E | - | 3.6875 in | 7.5938 in | - | 9.2500 in | - | - | - | - |
| T1421 | - | 2.8750 in | 5.1181 in | - | 3.0625 in | - | - | - | - |
| 74472 / 74851 CD / X1S-74472 | - | 9 mm | 11 mm | - | - | - | - | - | - |
| LM 761649 DW/610/610 D | - | - | - | - | - | - | - | - | - |
| QJ240-N2-MPA | - | - | 3.1400 in | - | - | - | - | - | - |
| 22232 E1A-M-C3 | - | 1.7500 in | 4.2500 in | - | 1.0625 in | - | - | - | - |
| 294/850EF | - | 150 mm | 270 mm | - | 45 mm | - | - | - | - |
| L357049NW/L357010 | - | 1.4375 in | 5.1250 in | - | 6.4375 in | - | - | - | - |
| HMC 252349 D/310/310 D Needle Non Thrust Roller Bearings | series:UC200MZ2RF; d:17 mm; seal type:Dual Lip with Slinge; radial dynamic load capacity:1310 kgf; D:47 mm; bearing material:AISI 52100 Steel - Z; locking device:Set Screw Collar; outer ring width:17 mm; radial static load capacity:680 kgf; bore type:Round; inner ring width:31 mm; manufacturer product page:Click here; |
| HH935749/1 Needle Roller Bearings | overall length:10.4375 in; overall height:6.4375 in; standards met:ANSI/ABMA STD 9; B:4 in; lubrication type:Lubrication Fitting; locking device:Concentric Collar; d:2.9375 in; bore type:Round; expansion type:Non-Expansion Bearin; base width:3-3/16 in; base to bore centerline:3.2500 in; end type:Closed; series:2000; maximum rpm:1700 RPM; radial dynamic load capacity:46800 lb; housing construction:Solid Pillow Block; |
| HM261049 Complex Bearings | grade:Precision; head diameter:16 mm; misalignment angle:14 °; series:MK; lubrication type:No Fitting; radial static load capacity:5,168 N; housing material:Carbon Steel - corro; head width:6.25 mm; ball material:52100 BEARING STEEL; rod end type:Male Threaded; lubrication:Unlubricated; d:5 mm; length to ball center:33 mm; shank thread length:20 mm; thread direction:Right Hand; race material:Alloy Steel - Heat T; |
| HJ326S1 Thrust Roller Bearings | B:1.8125 in; closure type:Sealed; radial dynamic load capacity:20300 lbs; operating temperature range:-20 to +250 &de; roller width:1.7500 in; roller shape:Crowned; radial static load capacity:17100 lbs; lubrication hole location:Inner Ring; series:Heavy Duty Inch CAMR; roller material:Chrome Steel; roller diameter:3.2500 in; maximum rpm:880 rpm; d:1.0000 in; manufacturer catalog number:4321200000; |
| HM265049 Tapered Roller Bearings | compatible bearing number:B448; d:2.9375 in; |
| HM265049ZD/010/010D Tapered Roller Bearing Assemblies | overall length:1.5000 in; inside diameter:1.2500 in; bushing type:Plain; bushing outside diameter:1.7500 in; bushing material:PTFE; |
| M 265049 DW/010/010 D Angular Contact Ball Bearings | D:2-19/32 in; series:UCPA200C4HR23; B:1-57/64 in; d:1.1875 in; housing material:Cast Iron; locking device:Set Screw; base to bore centerline:1.6875 in; radial static load capacity:2540 lbf; lubrication type:Lubrication Fitting; mounting:Tapped Base; duty type:Normal Duty; overall height:3.3125 in; seal type:Contact with Slinger; radial dynamic load capacity:4410 lbf; replacement bearing:UC206-19C4HR23; |
| FCDP150216715/HC/C4 Needle Roller Bearings | maximum pv value:Periodic lubrication; sleeve bearing type:Plain Sleeve; additional details:Lead Free; series:30B; d:10 mm; standards met:RoHS; maximum v value:Periodic lubrication; operating temperature range:Periodic lubrication; material specification:300 Cast Iron; D:16 mm; maximum p value:10 N/mm2; overall length:10 mm; bearing material:Oil-Impregnated Expa; |
| HM259049 DGW/010/010D Thrust Roller Bearings | bearing material:Leaded-Tin Bronze; material specification:SAE 660 (C932&#; d:2 in; maximum pv value:75000; overall length:6 in; sleeve bearing type:Plain Sleeve; D:2-1/2 in; maximum p value:3000 psi; maximum v value:750 fp/min; standards met:ASTM B584-78; groove/plug type:None; operating temperature range:Maximum of +800; |
| T651 Thrust Roller Bearing | radial dynamic load capacity:5600 lbf; length through bore:1.937 in; housing material:PBT Thermoplastic; duty type:Standard Duty; bore type:Round; end type:Open; replacement bearing:MUC208-24; mounting type:Four-Bolt Flange; d:1.5000 in; seal type:Contact with Flinger; expansion type:Non-Expansion Bearin; D:4.0000 in; radial static load capacity:3210 lbf; series:MUCFPL200CW; locking device:Set Screw; |
| 294/5 Cam Follower And Track Roller | Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:9.988; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:V Lock; Housing Style:4 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:1/2 Inch; Relubricatable:Yes; Insert Part Number:22213; Seals:Teflon Labyrinth; Housing Configuration:1 Piece Solid; |
| LM241149NW/LM241110D Complex Bearings | hub diameter:106 mm; shaft centerline height:65 mm; series:UCFK200; d:45 mm; lubrication type:Lubrication Fitting; seal type:Contact with Flinger; mounting type:Three-Bolt Bracket S; radial static load capacity:2090 kgf; bolt size:M10; vertical bolt spacing:43 mm; horizontal bolt spacing:54 mm; unit standoff:52.2 mm; duty type:Standard Duty; housing material:Cast Iron; manufacturer product page:Click here; |
771/630 Cam Follower And Track Roller Video
Angular Contact Ball Bearings - an overview | ScienceDirect
In angular contact ball bearings the line of action of the load, at the contacts between balls and raceways, forms an angle with the bearings axis. The inner and
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular contact ball bearings - SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that