| No. | Brand | d | D | c | B | C | l | A | m |
| HM127446/127415XD | - | 1.7500 in | 157 mm | - | 34 mm | - | - | - | - |
| 3004244 | - | - | - | - | - | - | - | - | - |
| TNU05056VAA | - | 1.1875 in | 2.3750 in | - | - | - | - | - | - |
| NU2348-EX-M1A-C3 | - | 40 mm | 4.0000 in | - | 132.1 mm | - | - | - | - |
| 207716 | - | 2.0625 in | 2.6250 in | - | 0.2813 in | - | - | - | - |
| T1115 | - | 2.7500 in | 5.8750 in | - | - | - | - | - | - |
| 29268M | - | 1.3750 in | - | - | - | - | - | - | - |
| M 255449 D/410/410 D | - | 1/2 in | 11/16 in | - | 9/16 in | - | - | - | - |
| T661 | - | - | 3.5050 in | - | - | - | - | - | - |
| T112 | - | 2.0000 in | - | - | - | - | - | - | - |
| LM 654648 DW/610/610 D | - | 1.0000 in | 3-3/4" to | - | 1-37/64 in | - | - | - | - |
| 531817 | - | 130 mm | - | - | - | - | - | - | - |
| NJ 2348 EX.M1A.C3 | - | 8 mm | - | - | - | - | - | - | - |
| HM265049 | - | 2.9375 in | - | - | - | - | - | - | - |
| T711 | - | 0.8750 in | 1.6563 in | - | 0.6250 in | - | - | - | - |
| 67885DW, 67820,67820CD | - | 3/8 in | 1/2 in | - | - | - | - | - | - |
| 230SM160MA | - | 32 mm | 52 mm | - | - | - | - | - | - |
| M272647DW/10/10D | - | 3.6250 in | - | - | - | - | - | - | - |
| HH924349/HH924310D | - | 11.0000 in | - | - | - | - | - | - | - |
| H247535/H247510D | - | 4 mm | 7 mm | - | - | - | - | - | - |
| T811 XA | - | 5/16 in | 3/8 in | - | - | - | - | - | - |
| T1605 | - | - | 1.8750 in | - | - | - | - | - | - |
| 531814 | - | 1/2 in | 3/4 in | - | - | - | - | - | - |
| 67990/67220CD | - | 1.9375 in | 4.3750 in | - | - | - | - | - | - |
| M255449 | - | 1.0000 in | 4 in | - | 1-11/64 in | - | - | - | - |
| T7519 | - | 30 mm | 62 mm | - | 24 mm | - | - | - | - |
| FCDP150216715/HC/C4 | - | 10 mm | 16 mm | - | - | - | - | - | - |
| T811 Angular Contact Ball Bearings | rod hole diameter:28.6 mm; overall length:149.2 mm; lubrication type:Lubrication Fitting; dynamic load capacity:3080 kgf; series:MUCST200NP; seal type:Contact with Slinger; locking device:Set Screw; unit type:Side Mount; overall height:117.5 mm; slot width:17.5 mm; housing material:Cast Iron - Nickel P; d:50 mm; slot spacing:85.7 mm; |
| HM261049 Complex Bearings | grade:Precision; head diameter:16 mm; misalignment angle:14 °; series:MK; lubrication type:No Fitting; radial static load capacity:5,168 N; housing material:Carbon Steel - corro; head width:6.25 mm; ball material:52100 BEARING STEEL; rod end type:Male Threaded; lubrication:Unlubricated; d:5 mm; length to ball center:33 mm; shank thread length:20 mm; thread direction:Right Hand; race material:Alloy Steel - Heat T; |
| NP489116-90K43) / NP852606 Cylindrical Roller Bearings | manufacturer product page:Click here; d:3.3465 in; D:5.9055 in; bearing type:Complete Assembly; bearing material:Steel; B:2.7500 in; |
| T1605 Thrust Roller Bearing | lip material:Labyrinth; maximum shaft surface speed:4500 fpm; Weight:0.27 lb; shaft diameter:0.8750 in; D:1.8750 in; construction description:ISO-GARD® Flange; width:0.7500 in; manufacturer catalog number:29502-4267; pressure tolerance:Ambient; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; continuous temperature range:-22 to 400°F; harmonization code:3926904590.US; |
| LM 767749 DW/10/10 D Tapered Roller Bearings | D:7.94 to 8.31 in; overall height:6.4375 in; base to bore centerline:3.2500 in; manufacturer catalog number:070385; base width:3-3/4 in; d:2.6875 in; series:S-2000; maximum rpm:1490 RPM; B:3.59 in; finish/coating:Black Oxide; radial static load capacity:53000 lb; overall length:10.4375 in; replacement bearing:22215; mounting:Four-Bolt Base; locking device:Concentric Collar; lubrication type:Lubrication Fitting; |
| L357049NW/L357010 C.D Spherical Roller Bearings | roller shape:Crowned; manufacturer upc number:4549557007774; series:C-Lube; thread size:M12 x 1.5; head type:Socket Hex; roller diameter:32 mm; closure type:Sealed; stud diameter:12 mm; |
| LM241149NW/LM241110D Complex Bearings | hub diameter:106 mm; shaft centerline height:65 mm; series:UCFK200; d:45 mm; lubrication type:Lubrication Fitting; seal type:Contact with Flinger; mounting type:Three-Bolt Bracket S; radial static load capacity:2090 kgf; bolt size:M10; vertical bolt spacing:43 mm; horizontal bolt spacing:54 mm; unit standoff:52.2 mm; duty type:Standard Duty; housing material:Cast Iron; manufacturer product page:Click here; |
| M667947DGW-911-911D Plain Bearings | operating temperature range:-65 to +250 &de; internal clearance:C0; D:10.5000 in; standards met:MIL-PRF-3150, AISI 5; maximum rpm:1230 RPM; fillet radius:0.8 in; inside diameter:9.0000 in; axial static load capacity:20310 lbf; bearing material:Steel; axial dynamic load capacity:11630 lbf; radial dynamic load capacity:4650 lbf; radial static load capacity:6770 lbf; precision rating:ABEC 1 (ISO Cla; |
| M667948/M667911 Cylindrical Roller Bearings | housing material:Cast Iron - Nickel P; radial static load capacity:3460 lbf; mounting type:Four-Bolt Piloted; lubrication type:Lubrication Fitting; pilot diameter:3-35/64 in; bore type:Round; series:UCFC200NP; duty type:Standard Duty; radial dynamic load capacity:5820 lbf; replacement bearing:UC207-20; bolt circle diameter:4.3281 in; d:1.2500 in; B:5.3125 in; unit standoff:1-7/16 in; seal type:Contact with Flinger; |
| 7048BGM Angular Contact Ball Bearings | d:0.5000 in; mounting:Two-Bolt Base; seal type:Contact/Lip; operating temperature range:-30 to +300 &de; expansion type:Non-Expansion Bearin; housing material:Cast Iron; overall length:5.0625 in; bore type:Round; base width:1-1/2 in; overall height:2.1563 in; D:3-5/16 to 4 in; locking device:Eccentric Collar; maximum rpm:5000 RPM; series:L/H; duty type:Normal Duty; finish/coating:Uncoated; |
| HM265049ZD/010/010D Tapered Roller Bearing Assemblies | overall length:1.5000 in; inside diameter:1.2500 in; bushing type:Plain; bushing outside diameter:1.7500 in; bushing material:PTFE; |
| HM266449DW/410/410D Spherical Roller Bearings | bolt size:.6250 in; lubrication type:Lubrication Fitting; duty type:Normal Duty; base to bore centerline:2.3125 in; finish/coating:Uncoated; overall height:4.5625 in; base width:2.3750 in; operating temperature range:Max 250°; d:1.5625 in; bore type:Round; housing material:Cast Iron; manufacturer catalog number:700610; overall length:8.5000 in; mounting:Two-Bolt Base; expansion type:Non-Expansion Bearin; |
24088 ECA K30/C3/W33 Tapered Roller Bearing Assemblies Video
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular contact ball bearings - SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular Contact Ball Bearings - an overview | ScienceDirect
In angular contact ball bearings the line of action of the load, at the contacts between balls and raceways, forms an angle with the bearings axis. The inner and