| No. | Brand | d | D | c | B | C | l | A | m |
| 74472 / 74851 CD / X1S-74472 | - | 9 mm | 11 mm | - | - | - | - | - | - |
| EE130900D-902ASSY | - | 50 mm | 111.2 mm | - | 142.7 mm | - | - | - | - |
| 23240 E1A-K-MB1 | - | 1.6250 in | 4.8750 in | - | 6.2500 in | - | - | - | - |
| 3004244 | - | - | - | - | - | - | - | - | - |
| HM265049DW | - | 7.4896 in | - | - | - | - | - | - | - |
| 982832QT | - | 3.6875 in | - | - | - | - | - | - | - |
| 7330B MP | - | 2-3/4 in | 4.468 in | - | 1 in | - | - | - | - |
| FCDP150216715/HC/C4 | - | 10 mm | 16 mm | - | - | - | - | - | - |
| EE420801/421451CD | - | 4-7/16 in | 12-15/16 to 14- | - | 9 in | - | - | - | - |
| LM272235/LM27221 | - | 3-7/16 in | 9-1/4 to 10-1&# | - | 3-1/2 in | - | - | - | - |
| M667947DGW-911-911D | - | - | 10.5000 in | - | 0.7500 in | - | - | - | - |
| T691 | - | - | - | - | - | - | - | - | - |
| M259030T-90054 | - | - | 5.2500 in | - | - | - | - | - | - |
| 29326 E | - | 20 mm | 98.8 mm | - | 124 mm | - | - | - | - |
| NJ 2348 EX.M1A.C3 | - | 8 mm | - | - | - | - | - | - | - |
| T811 X | - | 7.5000 in | 10.5000 in | - | - | - | - | - | - |
| NP962698 | - | 15 mm | 21 mm | - | - | - | - | - | - |
| 207716 | - | 2.0625 in | 2.6250 in | - | 0.2813 in | - | - | - | - |
| LM 247748 D/710/710 D | - | 0.2500 in | - | - | - | - | - | - | - |
| 32044 XM-2TS-DM | - | 1.7500 in | 3.5433 in | - | - | - | - | - | - |
| 2687/1049 | - | - | - | - | 28 mm | - | - | - | - |
| T911 | - | 1/2 in | 3/4 in | - | - | - | - | - | - |
| T1605 | - | - | 1.8750 in | - | - | - | - | - | - |
| M268749 | - | 1.9375 in | 3.7500 in | - | - | - | - | - | - |
| 67790/67720CD | - | 1.7500 in | - | - | - | - | - | - | - |
| T48 | - | 25 mm | 62 mm | - | 17 mm | - | - | - | - |
| 239/530CAKW33 | - | 20 mm | 32 mm | - | - | - | - | - | - |
| M667947D/M667911 Angular Contact Ball Bearings | bushing outside diameter:3.0000 in; overall outside diameter:3 in; bushing type:Plain; inside diameter:2.7500 in; bushing material:RTFE; groove type:Plain Interior; |
| 29326 E Spherical Roller Bearings | D:98.8 mm; d:20 mm; housing material:Cast Iron; B:124 mm; mounting type:Two-Bolt Flange; radial static load capacity:1080 lbf; bore type:Round; duty type:Standard Duty; radial dynamic load capacity:2150 lbf; lubrication type:Lubrication Fitting; series:UKFT200+H2000; seal type:Contact with Flinger; length through bore:0.866 in; locking device:Adapter Sleeve; replacement bearing:UK205+H2305; |
| M 244249 D/210/210 D Cylindrical Roller Bearings | d:2.4375 in; housing material:Cast Iron; series:UKFX00+HA2000; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; length through bore:2.874 in; seal type:Contact with Flinger; locking device:Adapter Sleeve; radial static load capacity:11900 lbf; replacement bearing:UKX15+HA2315; radial dynamic load capacity:16300 lbf; mounting type:Four-Bolt Flange; duty type:Medium Duty; |
| 67790 D/20/21 D Thrust Ball Bearings | bearing material:52100 Bearing Steel; bearing type:Inner Ring; manufacturer product page:Click here; Weight:16.25 lbs; d:6.0000 in; B:3.1000 in; D:8.1560 in; lubrication type:Lubrication Groove &; manufacturer upc number:637400003265; series:IRB; finish/coating:Molybdenum Disulfide; |
| 294/850EF Cylindrical Roller Bearings | d:150 mm; maximum rpm:3350 RPM; series:62; static load capacity:168000 N; cage material:Brass; fillet radius:2.5 mm; row type & fill slot:Single Row Non-Fill; closure type:Open; operating temperature range:Maximum of +200; B:45 mm; internal clearance:C3; bore type:Round; standards met:DIN 625-1; dynamic load capacity:187000 N; precision rating:ABEC 1 (ISO Cla; finish/coating:Uncoated; D:270 mm; |
| HH935749/1 Needle Roller Bearings | overall length:10.4375 in; overall height:6.4375 in; standards met:ANSI/ABMA STD 9; B:4 in; lubrication type:Lubrication Fitting; locking device:Concentric Collar; d:2.9375 in; bore type:Round; expansion type:Non-Expansion Bearin; base width:3-3/16 in; base to bore centerline:3.2500 in; end type:Closed; series:2000; maximum rpm:1700 RPM; radial dynamic load capacity:46800 lb; housing construction:Solid Pillow Block; |
| M268749 Thrust Ball Bearings | radial dynamic load capacity:9300 lb; radial static load capacity:43000 lb; maximum rpm:3050 RPM; seal type:Triple Lip; locking device:Single Setscrew; finish/coating:Uncoated; inner ring width:3-1/2 in; bearing material:Cast Iron; manufacturer catalog number:077201; D:3.7500 in; bearing type:Taper Roller; outer ring width:2.44 in; d:1.9375 in; |
| LM272249D/LM272210-LM272210D Complex Bearings | mounting type:Four-Bolt Flange; locking device:Set Screw; seal type:Felt Seal; manufacturer catalog number:700456; D:4.3750 in; finish/coating:Uncoated; expansion type:Non-Expansion Bearin; series:SF; operating temperature range:250°; B:5.6250 in; length through bore:2.0313 in; housing width:1.5625 in; housing material:Cast Iron; inner ring width:2.0313 in; lubrication type:Lubrication Fitting; |
| EE231400/231976D Tapered Roller Bearings | Housing Material:Cast Iron; Manufacturing Plant Location:Rogersville, TN; Bearing Thread Size:M8 X 1.25; d:20.0000 mm; Housing Type:Tapped Base Pillow B; Bearing Duty:Intermediate Duty; Flinger Material:None; Bearing Insert Material:Steel; UPC:782475466207; Bearing Family:Eccentric Collar Bal; Base to Center Height:Standard; Bearing Inner Ring Material:Steel; Bearing Series:204 Series; Ball Bearing Housing Series:204 Series; |
| 230SM160MA Needle Non Thrust Roller Bearings | maximum pv value:Periodic lubrication; bearing material:Oil-Impregnated Expa; maximum p value:10 N/mm2; sleeve bearing type:Flanged Bearing; maximum v value:Periodic lubrication; series:30F; overall length:30 mm; D:52 mm; additional details:Lead Free; material specification:300 Cast Iron; operating temperature range:Periodic lubrication; standards met:RoHS; flange width:5 mm; d:32 mm; |
| HM259049 DGW/010/010D Thrust Roller Bearings | bearing material:Leaded-Tin Bronze; material specification:SAE 660 (C932&#; d:2 in; maximum pv value:75000; overall length:6 in; sleeve bearing type:Plain Sleeve; D:2-1/2 in; maximum p value:3000 psi; maximum v value:750 fp/min; standards met:ASTM B584-78; groove/plug type:None; operating temperature range:Maximum of +800; |
| 74472 / 74851 CD / X1S-74472 Thrust Ball Bearings | maximum pv value:2.45 N/mm²; bearing material:Polyacetal; material specification:80; overall length:15 mm; sleeve bearing type:Flanged Bushing; series:80F; D:11 mm; d:9 mm; additional details:Lead Free; flange width:1 mm; maximum p value:17.5 N/mm²; standards met:RoHS; maximum v value:0.85 m/s SFPM; operating temperature range:-40 to 176 °F; |
HM266449DW/410D/410D Spherical Roller Bearings Video
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular contact ball bearings - SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings - an overview | ScienceDirect
In angular contact ball bearings the line of action of the load, at the contacts between balls and raceways, forms an angle with the bearings axis. The inner and