| No. | Brand | d | D | c | B | C | l | A | m |
| LM272235/LM27221 | - | 3-7/16 in | 9-1/4 to 10-1&# | - | 3-1/2 in | - | - | - | - |
| NU2276-E-M1A | - | 50 mm | 110 mm | - | 40 mm | - | - | - | - |
| HM266449 | - | - | 78 mm | - | - | - | - | - | - |
| 207716 | - | 2.0625 in | 2.6250 in | - | 0.2813 in | - | - | - | - |
| M667947D/M667911 | - | - | - | - | - | - | - | - | - |
| 351988 | - | 2-1/4 in | - | - | 7.1250 in | - | - | - | - |
| T811 XA | - | 5/16 in | 3/8 in | - | - | - | - | - | - |
| 54FC7623 | - | 1.2500 in | 3.5625 in | - | 4.4375 in | - | - | - | - |
| T661 | - | - | 3.5050 in | - | - | - | - | - | - |
| NCF 1868 V | - | - | 5.2350 in | - | - | - | - | - | - |
| T511 A | - | 110 mm | 160 mm | - | 20 mm | - | - | - | - |
| NCF 18/800 V | - | 220 mm | 300 mm | - | 38 mm | - | - | - | - |
| L357049NW/L357010 | - | 1.4375 in | 5.1250 in | - | 6.4375 in | - | - | - | - |
| HM 259049 D/10/10 D | - | 6.2960 in | - | - | - | - | - | - | - |
| T651 | - | 1.5000 in | 4.0000 in | - | - | - | - | - | - |
| M 265049 DW/010/010 D | - | 1.1875 in | 2-19/32 in | - | 1-57/64 in | - | - | - | - |
| 771/500 | - | 2.6875 in | 5.3000 in | - | 8.7500 in | - | - | - | - |
| HM261049DW | - | 35 mm | 72 mm | - | 23 mm | - | - | - | - |
| 22240 E1A-MB1-C3 | - | - | - | - | - | - | - | - | - |
| NNCF 5044 V/C3 | - | - | 4.9210 in | - | - | - | - | - | - |
| 305338D | - | 1.9375 in | - | - | - | - | - | - | - |
| 351322 | - | 90 mm | 160 mm | - | 60 mm | - | - | - | - |
| 7330B MP | - | 2-3/4 in | 4.468 in | - | 1 in | - | - | - | - |
| 531817 | - | 2.4375 in | 5.8800 in | - | 7.3800 in | - | - | - | - |
| HM265049TD/1 | - | 2 Inch | 50.8 Millimeter | 2.87 Inch | 72.898 Millimeter | - | - | - | - | - | - |
| 531817 | - | 130 mm | - | - | - | - | - | - | - |
| T911 | - | 1/2 in | 3/4 in | - | - | - | - | - | - |
| LM241149NW/LM241110D | - | 45 mm | - | - | - | - | - | - | - |
| 29432 E | - | 3.6875 in | 7.5938 in | - | 9.2500 in | - | - | - | - |
| LM 119348 D/11/11 D | - | 1.6875 in | 4.8750 in | - | - | - | - | - | - |
| NCF 18/800 V Cylindrical Roller Bearings | snap ring included:Without Snap Ring; B:38 mm; static load capacity:180 kN; d:220 mm; operating temperature range:-40 to 212 °F &d; manufacturer upc number:7316577744654; D:300 mm; manufacturer product page:Click here; maximum rpm:4300 rpm; bore type:Round; internal clearance:C3; fillet radius:2 mm; finish/coating:Uncoated; Weight:17.5 lbs; cage material:Brass; dynamic load capacity:151 kN; closure type:Open; |
| 305264D Needle Roller Bearings | d:50 mm; lubrication type:Lubrication Fitting; bore type:Round; mounting type:Four-Bolt Flange; radial dynamic load capacity:3600 kgf; D:111 mm; radial static load capacity:2370 kgf; seal type:Contact Seal; housing material:Cast Iron; series:KHF200; expansion type:Non-Expansion Bearin; duty type:Standard Duty; length through bore:43.7 mm; locking device:Eccentric Collar; replacement bearing:KH210; |
| NU 2368 FR Thrust Roller Bearing | Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:4.54; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Eccentric Collar; Housing Style:4 Bolt Square Flange Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:1/2 Inch; Relubricatable:Yes; Insert Part Number:22208; Seals:Triple Lip Nitrile Rubber; |
| 305263D Spherical Roller Bearings | UPC:782475019182; Material Type:CARBON STEEL; Angle Size:2 X 2 X 1/4; Screw Treatment:ZINC PLATED; Ship Weight:17.32 LB; Take-Up Frame Style:LIGHT DUTY; Frame Size:20; Take-Up Frame Travel:18.0000 in; Special Coating:STANDARD PAINT; Screw Diameter:0.7500 in; |
| M667948/M667911 Cylindrical Roller Bearings | housing material:Cast Iron - Nickel P; radial static load capacity:3460 lbf; mounting type:Four-Bolt Piloted; lubrication type:Lubrication Fitting; pilot diameter:3-35/64 in; bore type:Round; series:UCFC200NP; duty type:Standard Duty; radial dynamic load capacity:5820 lbf; replacement bearing:UC207-20; bolt circle diameter:4.3281 in; d:1.2500 in; B:5.3125 in; unit standoff:1-7/16 in; seal type:Contact with Flinger; |
| T511 Needle Self Aligning Roller Bearings | pressure tolerance:Ambient; width:0.6250 in; typical application:Exceptional Bearing; harmonization code:3926904590.US; manufacturer catalog number:29507-7412; lip material:Labyrinth; D:3.5000 in; construction description:ISO-GARD® Small; shaft diameter:2.6220 in; continuous temperature range:-22 to 400°F; misalignment tolerance:0.020 in; maximum shaft surface speed:4500 fpm; Weight:0.22 lb; |
| LM65448DW-610-610D Tapered Roller Bearing Assemblies | B:1.0000 in; drawn cup type:Open Ends with Full; manufacturer upc number:605790207723; D:1.0625 in; d:0.8125 in; closure type:Open; |
| NCF 1872 V Tapered Roller Bearings | bearing type:Spherical Roller; d:1.1875 in; series:USRB 5000; operating temperature range:Max 250°; base width:2.1875 in; seal type:Double Lip Contact; housing material:Cast Iron; mounting:Two-Bolt Base; D:4.5000 to 5.0000 in; housing construction:Solid Pillow Block; base to bore centerline:1.7500 in; B:2.7500 in; bolt size:0.3750 in; overall length:6.3125 in; locking device:Collar Mount; manufacturer catalog number:737079; |
| 24088 ECA K30/C3/W33 Tapered Roller Bearing Assemblies | internal clearance:C0; maximum rpm:840 RPM; D:790 mm; fillet radius:6 mm; operating temperature range:-30 of +200 &de; B:4.3800 in; closure type:Open; outer ring type:Not Split; lubrication hole type:Lubrication Groove &; dynamic load capacity:8300000 N; precision rating:Not Rated; outer ring width:280 mm; d:440 mm; cage material:Brass; bearing material:Steel; series:232; finish/coating:Uncoated; |
| M 255449 D/410/410 D Tapered Roller Bearings | precision rating:Not Rated; static load capacity:1780 lbf; cage material:Steel; operating temperature range:-25 to +225 &de; dynamic load capacity:1420 lbf; lubrication hole type:No Hole; B:9/16 in; D:11/16 in; closure type:Single Seal; drawn cup type:Open Ends; maximum rpm:15000 RPM; series:JT; d:1/2 in; standards met:ANSI/ABMA 18.2,; |
| 1077756 Spherical Roller Bearings | Category:Thrust Roller Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:42.54; Product Group:B04144; Rolling Element:Cylindrical Roller Bearing; Self Aligning:No; Component Description:Roller Assembly plus Raceways; Thrust Bearing:Yes; Single or Double Direction:Single Direction; Banded:No; Cage Material:Machined Bronze; Precision Class:ABEC 1 | ISO P0; Other Features:Single Row; Long Description:300MM Bore 1; 304MM Bore 2; 420MM Outside Diameter; 95MM Height; Cylindrical Roller Bearing; Single Direction; Not Self Aligning; Not Banded; Machined Bronze Cage; ABEC 1 | ISO P0; Roller Assembly plu; |
| HM259049 DGW/010/010D Thrust Roller Bearings | bearing material:Leaded-Tin Bronze; material specification:SAE 660 (C932&#; d:2 in; maximum pv value:75000; overall length:6 in; sleeve bearing type:Plain Sleeve; D:2-1/2 in; maximum p value:3000 psi; maximum v value:750 fp/min; standards met:ASTM B584-78; groove/plug type:None; operating temperature range:Maximum of +800; |
HM261049DW Tapered Roller Bearings Video
Angular Contact Ball Bearings - an overview | ScienceDirect
In angular contact ball bearings the line of action of the load, at the contacts between balls and raceways, forms an angle with the bearings axis. The inner and
Angular contact ball bearings - SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction