| No. | Brand | d | D | c | B | C | l | A | m |
| NUP198 | - | 2.362 Inch | 60 Millimeter | 3.39 Inch | 86.106 Millimeter | - | 2.756 Inch | 70 Millimeter | - | - | - | - |
| NU3184 | - | - | 4.4760 in | - | - | - | - | - | - |
| T48 | - | 25 mm | 62 mm | - | 17 mm | - | - | - | - |
| 29432 E | - | 3.6875 in | 7.5938 in | - | 9.2500 in | - | - | - | - |
| NP962698 | - | 15 mm | 21 mm | - | - | - | - | - | - |
| T811 X | - | 7.5000 in | 10.5000 in | - | - | - | - | - | - |
| HH255149D/1 | - | 2-3/16 in | 5 in | - | - | - | - | - | - |
| 294/850EF | - | 150 mm | 270 mm | - | 45 mm | - | - | - | - |
| 29268M | - | 1.3750 in | - | - | - | - | - | - | - |
| TNU05056VAA | - | 1.1875 in | 2.3750 in | - | - | - | - | - | - |
| 26064 E1A-MB1 | - | 2.2500 in | 4.7190 in | - | 2.5625 in | - | - | - | - |
| HM265049DW | - | 7.4896 in | - | - | - | - | - | - | - |
| GE240ES 2RS | - | 5 mm | 16 mm | - | 5 mm | 5 mm | - | - | - |
| 305338D | - | 1.9375 in | - | - | - | - | - | - | - |
| 29326 E | - | 20 mm | 98.8 mm | - | 124 mm | - | - | - | - |
| 47TS483434-1WSGFCS150 | - | - | - | - | - | - | - | - | - |
| FC4056200E | - | 35 mm | - | - | - | - | - | - | - |
| LM241149NW/LM241110D | - | 45 mm | - | - | - | - | - | - | - |
| T1115 | - | 2.7500 in | 5.8750 in | - | - | - | - | - | - |
| T1605 | - | - | 1.8750 in | - | - | - | - | - | - |
| HJ326S1 | - | 1.0000 in | - | - | 1.8125 in | - | - | - | - |
| NU 2368 FR | - | 1.438 Inch | 36.525 Millimeter | 2.75 Inch | 69.85 Millimeter | - | - | - | - | - | - |
| 294/5 | - | - | - | - | - | - | - | - | - |
| LM241149NW/LM241110D | - | 1.7500 in | - | - | 7.6250 in | - | - | - | - |
| 24088 ECA K30/C3/W33 | - | 440 mm | 790 mm | - | 4.3800 in | - | - | - | - |
| 2687/1049 | - | - | - | - | 28 mm | - | - | - | - |
| T921 | - | 3.5000 in | 6.1000 in | - | - | - | - | - | - |
| 24168 B.C3 | - | 50 mm | 90 mm | - | 20 mm | - | - | - | - |
| NJ 2348 EX.M1A.C3 | - | 8 mm | - | - | - | - | - | - | - |
| 530897 Plain Bearings | expansion type:Non-Expansion Bearin; housing construction:Solid Pillow Block; bearing type:Tapered Roller; finish/coating:Uncoated; lubrication type:Lubrication Fitting; base to bore centerline:169.90 mm; bore type:Round; radial dynamic load capacity:181.1 kN; overall length:559 mm; d:135 mm; base width:159 mm; seal type:Triple Lip; mounting:Four-Bolt Base; B:9 in; locking device:Concentric Collar; |
| T651 Thrust Roller Bearing | radial dynamic load capacity:5600 lbf; length through bore:1.937 in; housing material:PBT Thermoplastic; duty type:Standard Duty; bore type:Round; end type:Open; replacement bearing:MUC208-24; mounting type:Four-Bolt Flange; d:1.5000 in; seal type:Contact with Flinger; expansion type:Non-Expansion Bearin; D:4.0000 in; radial static load capacity:3210 lbf; series:MUCFPL200CW; locking device:Set Screw; |
| NU2276-E-M1A Tapered Roller Bearings | housing material:Cast Iron; overall height:8.31 in; finish/coating:Uncoated; maximum rpm:2060 RPM; series:Type E; dynamic load capacity:11120 lb; B:4-1/2 in; bearing type:Tapered Roller; unit type:Top Angle; compatible frame number:TP40; manufacturer catalog number:023159; expansion type:Non-Expansion Bearin; overall length:8 in; seal type:Triple Lip; locking device:Double Set Screw; d:2.9375 in; |
| LM247748DW/LM247710-LM247710D Tapered Roller Bearings | housing material:Cast Iron - Teflon P; D:4-11/16" t; base to bore centerline:1.8750 in; bore type:Round; bolt size:1/2; overall height:3.6875 in; d:1.4375 in; locking device:Set Screw; series:MUCP200TC; lubrication type:Lubrication Fitting; mounting:Two-Bolt Base; B:1-15/16 in; overall length:6.5625 in; seal type:Contact with Slinger; radial static load capacity:2770 lbf; radial dynamic load capacity:4950 lbf; |
| EE420801/421451CD Thrust Roller Bearing | expansion type:Non-Expansion Bearin; B:9 in; duty type:Standard Duty; base width:6-5/16 in; finish/coating:Uncoated; D:12-15/16 to 14-; base to bore centerline:4-1/8 in; d:4-7/16 in; operating temperature range:Maximum of +300; housing construction:Split Pillow Block; standards met:UL, AFBMA, AGMA, ASM; bearing material:Bronze; overall height:8-1/2 in; manufacturer catalog number:231108; |
| 67790DW/67720/67721D Thrust Ball Bearings | locking device:Set Screw; D:7.13 in; seal type:Triple Lip; duty type:Heavy Duty; series:B22400; bore type:Round; overall height:5.5000 in; housing construction:Split Pillow Block; maximum rpm:1350 RPM; base width:2-11/16 in; radial dynamic load capacity:38300 lbf; bearing type:Spherical Roller; lubrication type:Cannot Be Relubricat; housing material:Cast Iron; mounting:Two-Bolt Base; radial static load capacity:53500 lbf; |
| T1011 Cam Follower And Track Roller | fillet radius:2 mm; contact angle:15 °; maximum rpm:3700 RPM; D:205 mm; radial dynamic load capacity:31000 lbf; series:100-R; internal clearance:C3; radial static load capacity:33700 lbf; outer ring width:34 mm; row type & fill slot:Single-Row Non-Fill; B:34 mm; precision rating:Not Rated; closure type:Open; d:130 mm; standards met:ABMA; finish/coating:Uncoated; |
| HM266449DW/410D/410D Spherical Roller Bearings | maximum v value:750 fp/min; operating temperature range:-450 to 500 ºF; D:4-3/4 in; standards met:83-7-7-3, ASTM B505,; material:Cast Bronze; maximum pv value:75000; overall length:13 in; maximum p value:4000 psi; groove/plug type:None; d:2-1/2 in; material specification:SAE 660 (C932&#; |
| M 270449 DW/410/410 D Thrust Ball Bearings | d:1.3750 in; manufacturer upc number:4547359482126; manufacturer product page:Click here; operating temperature range:-40 to 250 ºF; dynamic load capacity:10500 lbf; finish/coating:Uncoated; bearing material:Case Carburized Stee; fillet radius:0.0600 in; inner ring width:0.7200 in; cone width:0.7200 in; static load capacity:12600 lbf; |
| 294/5 Needle Aircraft Roller Bearings | seal type:Four Lip; compatible bearing type:Spherical Roller; compatible bore diameter:110 mm; seal material:Thermoplastic Elasto; |
| LM121948DW Needle Aircraft Roller Bearings | head type:Slotted; closure type:Sealed; thread size:3/8-24; roller shape:Flat; roller width:0.5000 in; bearing element:Needle Rollers; maximum rpm:5000 RPM; axial dynamic load capacity:1800 lbf; radial static load capacity:1840 lb; lubrication hole location:Stud Side, Stud End; roller material:Chrome Steel; stud length:0.8750 in; axial static load capacity:3100 lbf; stud diameter:0.3750 in; roller diameter:0.8750 in; |
| EE130900D-902ASSY Cylindrical Roller Bearings | expansion type:Non-Expansion Bearin; mounting type:Four-Bolt Flange; series:210; finish/coating:Uncoated; standards met:UL, NSF H1, AFBMA, A; locking device:Set Screw; lubrication type:Lubrication Fitting; duty type:Standard Duty; B:142.7 mm; radial static load capacity:5213 lb; seal type:Triple Lip with Flin; D:111.2 mm; housing material:Polymer; length through bore:56.1 mm; d:50 mm; manufacturer catalog number:136768; |
7502724M Tapered Roller Bearing Assemblies Video
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular Contact Ball Bearings - an overview | ScienceDirect
In angular contact ball bearings the line of action of the load, at the contacts between balls and raceways, forms an angle with the bearings axis. The inner and
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular contact ball bearings - SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction