| No. | Brand | d | D | c | B | C | l | A | m |
| FC689628 | - | - | - | - | 5/8 in | - | - | - | - |
| T1452 | - | - | - | - | - | - | - | - | - |
| EE420801/421451CD | - | 4-7/16 in | 12-15/16 to 14- | - | 9 in | - | - | - | - |
| M667947D/M667911 | - | - | - | - | - | - | - | - | - |
| DX760136 / DX307395 | - | 320 mm | - | - | 42 mm | - | - | 4 mm | - |
| M271149 | - | 3.4375 in | - | - | - | - | - | - | - |
| 23168 B MB | - | - | - | - | - | - | - | - | - |
| HM120848/120817XD | - | - | 6.2500 in | - | - | - | - | - | - |
| T52 | - | 1.1875 in | - | - | 4-1/8 in | - | - | - | - |
| T911 | - | 1/2 in | 3/4 in | - | - | - | - | - | - |
| HM265049 | - | 2.9375 in | - | - | - | - | - | - | - |
| 24168 B.C3 | - | 50 mm | 90 mm | - | 20 mm | - | - | - | - |
| 305338D | - | 1.9375 in | - | - | - | - | - | - | - |
| 32044 XM-2TS-DM | - | 1.7500 in | 3.5433 in | - | - | - | - | - | - |
| L163149/1 | - | 65 mm | 140 mm | - | 48 mm | - | - | - | - |
| NU1292-M1A | - | 1.2500 in | - | - | - | - | - | - | - |
| NUP198 | - | 2.362 Inch | 60 Millimeter | 3.39 Inch | 86.106 Millimeter | - | 2.756 Inch | 70 Millimeter | - | - | - | - |
| GE240ES 2RS | - | 5 mm | 16 mm | - | 5 mm | 5 mm | - | - | - |
| T902 | - | 1.5000 in | 4.0000 in | - | 5.1250 in | - | - | - | - |
| T451 | - | - | - | - | - | - | - | - | - |
| 23056 E1A-MB1-C3 | - | - | - | - | - | - | - | - | - |
| M255449 | - | 1.0000 in | 4 in | - | 1-11/64 in | - | - | - | - |
| NU 2368 FR | - | 1.438 Inch | 36.525 Millimeter | 2.75 Inch | 69.85 Millimeter | - | - | - | - | - | - |
| 239/530CAKW33 | - | 20 mm | 32 mm | - | - | - | - | - | - |
| 23156CAW33 | - | 12 mm | - | - | - | - | - | - | - |
| HM266449 Spherical Roller Bearings | series:IR; lubrication hole type:No Lubrication Hole; material:Chrome Steel; standards met:DIN 620; width:23 mm; type of needle bearing:Inner Ring; closure type:N/A; minimum radius:0.3 mm; D:22 mm; d:17 mm; |
| 239/710CAKW33 Needle Self Aligning Roller Bearings | thread direction:Right Hand; lubrication type:Zerk Fitting; shank thread size:1 1/4-12; grade:Precision; misalignment angle:17 º; shank thread length:2.1250 in; head width:1.000 in; housing material:Low Carbon Steel; race material:Steel; length to ball center:4.1250 in; rod end type:Male Threaded; ball material:Alloy Steel; overall height:5.5000 in; thread type:UNF-3A; d:1.0000 in; series:KM; |
| 351988 Needle Self Aligning Roller Bearings | expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; radial static load capacity:44400 lb; d:2-1/4 in; housing material:Cast Iron; seal type:Contact/Lip; bore type:Round; housing construction:Solid Flange Mount; radial dynamic load capacity:26400 lb; bolt circle diameter:6 in; maximum rpm:1950 RPM; B:7.1250 in; overall depth:3-5/16 in; flange mounting type:Four-Bolt Piloted; |
| HM252349/HM252310CD-HM252349XC Cylindrical Roller Bearings | radial static load capacity:15336 lbs; lubrication type:Maintenance Free ball material:52100 Bearing Steel; race material:Steel; head diameter:1.312 in; misalignment angle:12 °; rod end type:Female Threaded; series:HF-T; housing material:Alloy Steel Heat Tre; shank thread length:1.187 in; head width:0.500 in; lubrication:Self Lubricating; d:0.5000 in; ball width:0.625 in; standards met:SAEJ1120; |
| HM127446/127415XD Thrust Ball Bearings | overall height:114 mm; locking device:Set Screw; radial dynamic load capacity:7900 lbf; series:SYM; replacement bearing:YAR 210-112-2F; d:1.7500 in; lubrication type:Lubrication Fitting; B:34 mm; base width:54 mm; mounting:Two-Bolt Base; D:157 mm; seal type:Multi-Purpose; housing material:Cast Iron; radial static load capacity:5220 lbf; maximum rpm:4000 RPM; expansion type:Non-Expansion Bearin; finish/coating:Uncoated; |
| 982832QT Tapered Roller Bearing Assemblies | finish/coating:Powder Coated; bearing type:Spherical Roller; unit type:Side Mount; dynamic load capacity:118000 lb; d:3.6875 in; lubrication type:Lubrication Fitting; overall height:9-7/16 in; slot spacing:8.6250 in; rod hole diameter:2-1/8 in; series:ZT2000; expansion type:Non-Expansion Bearin; housing material:Cast Iron; maximum rpm:2050 RPM; overall length:12-1/8 in; locking device:Set Screw; |
| M257248DW/210/210D Needle Aircraft Roller Bearings | cage material:Steel; static load capacity:933 lbf; B:9 mm; D:42 mm; precision rating:ABEC 1 (ISO Cla; d:25 mm; row type & fill slot:Single Row Non-Fill; dynamic load capacity:1490 lbf; internal clearance:C0; finish/coating:Uncoated; closure type:Open; fillet radius:0.3 mm; bore type:Round; outer ring width:9 mm; maximum rpm:19000 RPM; series:1900-S; |
| HMC 252349 D/310/310 D Needle Non Thrust Roller Bearings | series:UC200MZ2RF; d:17 mm; seal type:Dual Lip with Slinge; radial dynamic load capacity:1310 kgf; D:47 mm; bearing material:AISI 52100 Steel - Z; locking device:Set Screw Collar; outer ring width:17 mm; radial static load capacity:680 kgf; bore type:Round; inner ring width:31 mm; manufacturer product page:Click here; |
| HM259049 Tapered Roller Bearings | harmonization code:8487900040.US; typical application:Exceptional Bearing; width:0.7000 in; misalignment tolerance:0.020 in; construction description:Guardian® Flange; lip material:Labyrinth; D:3.4540 in; maximum shaft surface speed:12000 fpm; shaft diameter:2.6250 in; Weight:1.33 lbs; manufacturer catalog number:29602-8618; continuous temperature range:-22 to 400°F; pressure tolerance:Ambient; |
| T651 Thrust Roller Bearing | radial dynamic load capacity:5600 lbf; length through bore:1.937 in; housing material:PBT Thermoplastic; duty type:Standard Duty; bore type:Round; end type:Open; replacement bearing:MUC208-24; mounting type:Four-Bolt Flange; d:1.5000 in; seal type:Contact with Flinger; expansion type:Non-Expansion Bearin; D:4.0000 in; radial static load capacity:3210 lbf; series:MUCFPL200CW; locking device:Set Screw; |
| 29432 E Cylindrical Roller Bearings | bolt size:0.8750 in; seal type:Double Lip Contact; bore type:Round; d:3.6875 in; duty type:Standard Duty; overall depth:5.0781 in; finish/coating:Uncoated; flange mounting type:Four-Bolt Square; locking device:Collar Mount; bolt circle diameter:10.7500 in; D:7.5938 in; housing construction:Solid Flange Mount; series:USFB 5000; lubrication type:Lubrication Fitting; manufacturer catalog number:737243; |
| LM241149NW/LM241110D Complex Bearings | hub diameter:106 mm; shaft centerline height:65 mm; series:UCFK200; d:45 mm; lubrication type:Lubrication Fitting; seal type:Contact with Flinger; mounting type:Three-Bolt Bracket S; radial static load capacity:2090 kgf; bolt size:M10; vertical bolt spacing:43 mm; horizontal bolt spacing:54 mm; unit standoff:52.2 mm; duty type:Standard Duty; housing material:Cast Iron; manufacturer product page:Click here; |
DX760136 / DX307395 Needle Roller Bearings Video
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings - an overview | ScienceDirect
In angular contact ball bearings the line of action of the load, at the contacts between balls and raceways, forms an angle with the bearings axis. The inner and
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular contact ball bearings - SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads