| No. | Brand | d | D | c | B | C | l | A | m |
| 24168 B.C3 | - | 50 mm | 90 mm | - | 20 mm | - | - | - | - |
| 771/500 | - | 2.6875 in | 5.3000 in | - | 8.7500 in | - | - | - | - |
| H247535/H247510D | - | 3.0000 in | 3.7500 in | - | 1.5000 in | - | - | - | - |
| HM 266449 DW/410/410 D | - | 60 mm | 110 mm | - | - | - | - | - | - |
| M259030T-90054 | - | - | 5.2500 in | - | - | - | - | - | - |
| LM 119348 D/11/11 D | - | 1.6875 in | 4.8750 in | - | - | - | - | - | - |
| HM262749DW/710/710D | - | 0.3750 in | 0.8125 in | - | - | - | - | - | - |
| 67790 D/20/21 D | - | 6.0000 in | 8.1560 in | - | 3.1000 in | - | - | - | - |
| EE420801/421451CD | - | 4-7/16 in | 12-15/16 to 14- | - | 9 in | - | - | - | - |
| HM261049 | - | 5 mm | - | - | - | - | - | - | - |
| NJ 2348 EX.M1A.C3 | - | 8 mm | - | - | - | - | - | - | - |
| 23240 E1A-K-MB1 | - | 1.6250 in | 4.8750 in | - | 6.2500 in | - | - | - | - |
| 294/5 | - | 2.25 Inch | 57.15 Millimeter | 4.02 Inch | 102.108 Millimeter | - | 3 Inch | 76.2 Millimeter | - | - | - | - |
| 530897 | - | 135 mm | 441.3 to 485.8 mm | - | 9 in | - | - | - | - |
| FCD8011241 | - | 60 mm | 110 mm | - | 2-9/16 in | - | - | - | - |
| NU240-ECMAC3 | - | 90 mm | 160 mm | - | 30 mm | - | - | - | - |
| HM265049TD/1 | - | 2 Inch | 50.8 Millimeter | 2.87 Inch | 72.898 Millimeter | - | - | - | - | - | - |
| T691 | - | - | - | - | - | - | - | - | - |
| FCDP150216715/HC/C4 | - | 10 mm | 16 mm | - | - | - | - | - | - |
| 23156VAB | - | 1/2 in | 15/16 in | - | - | - | - | - | - |
| T651 | - | 1.5000 in | 4.0000 in | - | - | - | - | - | - |
| T1421 | - | 2.8750 in | 5.1181 in | - | 3.0625 in | - | - | - | - |
| HM133426-90372 | - | - | - | - | 200 mm | - | - | - | - |
| 2687/1049 | - | - | - | - | 28 mm | - | - | - | - |
| 618/530MA | - | 1.9375 in | - | - | 2.5000 in | - | - | - | - |
| T902 | - | 1.5000 in | 4.0000 in | - | 5.1250 in | - | - | - | - |
| T811 X | - | 7.5000 in | 10.5000 in | - | - | - | - | - | - |
| T661 | - | - | 3.5050 in | - | - | - | - | - | - |
| NU2276-E-M1A | - | 50 mm | 110 mm | - | 40 mm | - | - | - | - |
| 48290 DW/220/220 D Tapered Roller Bearings | Bearing number:22328-E1-K-T41A + H2328; Size (mm):125x300x102; Bore Diameter (mm):125; Outer Diameter (mm):300; Width (mm):102; d1H:125 mm; D:300 mm; B:102 mm; Ba min:8 mm; c:24 mm; D1:255,7 mm; Da max:283 mm; Dm:180 mm; d:140 mm; d2:173,5 mm; da max:169 mm; db min:152 mm; ds:9,5 mm; l:131 mm; ns:17,7 mm; ra max:3 mm; rmin:4 mm; m:34,4 kg / Weight; m1:5,66 kg; Cr:1460000 N / Dynamic load rating (radial); |
| HH255149D/1 Angular Contact Ball Bearings | radial dynamic load capacity:38200 lb; inner ring width:3-11/32 in; maximum rpm:2000 RPM; expansion type:Non-Expansion Bearin; d:2-3/16 in; radial static load capacity:46800 lb; finish/coating:Powder Coated; lubrication type:Lubrication Fitting; seal type:Contact/Lip; locking device:Tapered Adapter Slee; housing material:Cast Iron; D:5 in; series:9000; housing width:2-5/8 in; bearing type:Spherical Roller; |
| H247535/H247510D Complex Bearings | cage material:Steel; fillet radius:0.0800 in; number of rows:2; static load capacity:65400 lbs; precision rating:Not Rated; standards met:ABMA, ISO; manufacturer catalog number:5004860000; bearing material:Chrome Steel; D:3.7500 in; lubrication hole type:Lubrication Groove &; operating temperature range:-20F to 250 °F; compatible inner ring:MI 40 N; maximum rpm:2000 rpm; needle bearing type:Machined Bearing wit; |
| 23156CAW33 Needle Non Thrust Roller Bearings | maximum rpm:8000 rpm; radial dynamic load capacity:4200 N; closure type:Open; manufacturer product page:Click here; operating temperature range:–30 °; radial static load capacity:5500 N; manufacturer upc number:4012802467123; d:12 mm; roller shape:Crowned; bearing element:Needle Rollers; roller width:9.8 mm; roller diameter:24 mm; |
| FC689628 Needle Self Aligning Roller Bearings | bore size:1/2 in; material specification:Teflon Added to Delr; bore shape:Round; bearing type:Roll End Plain Beari; closure type:Open; outside diameter design:Straight; bearing material:PTFE Reinforced POM; B:5/8 in; maximum pv value:8000; compatible tubing outside diameter:1-1/4 in; compatible tubing gauge:16 ga; operating temperature range:Maximum of +225; bearing outside diameter:1.12 in; |
| LM 767749 DW/10/10 D Tapered Roller Bearings | D:7.94 to 8.31 in; overall height:6.4375 in; base to bore centerline:3.2500 in; manufacturer catalog number:070385; base width:3-3/4 in; d:2.6875 in; series:S-2000; maximum rpm:1490 RPM; B:3.59 in; finish/coating:Black Oxide; radial static load capacity:53000 lb; overall length:10.4375 in; replacement bearing:22215; mounting:Four-Bolt Base; locking device:Concentric Collar; lubrication type:Lubrication Fitting; |
| LM 451349 DW/10/10 D Needle Self Aligning Roller Bearings | B:62 mm; manufacturer upc number:087796024496; internal clearance:C0; cage material:Brass Cage; d:120 mm; bore type:Straight; D:200 mm; |
| NP489116-90K43) / NP852606 Cylindrical Roller Bearings | manufacturer product page:Click here; d:3.3465 in; D:5.9055 in; bearing type:Complete Assembly; bearing material:Steel; B:2.7500 in; |
| 690RX2966CF1 Tapered Roller Bearings | finish/coating:Uncoated; B:1.6875 in; base width:1.8750 in; overall length:6.5625 in; lubrication type:Lubrication Fitting; locking device:Set Screw; housing material:Cast Iron; overall height:3.6875 in; series:NPL; bore type:Round; mounting:Two-Bolt Base; operating temperature range:Max 250°; d:35 mm; manufacturer catalog number:710029; seal type:Felt Seal; D:4.6875 to 5.3125 in; bolt size:.5000 in; |
| 771/630 Cam Follower And Track Roller | snap ring included:Without Snap Ring; d:50 mm; manufacturer upc number:087796294530; bore type:Round; D:90 mm; closure type:Two Contact Seals; B:23 mm; internal clearance:C0; cage material:Steel; precision rating:ABEC 1; |
| NU2348-EX-M1A-C3 Cam Follower And Track Roller | locking device:Set Screw; duty type:Standard Duty; D:4.0000 in; B:132.1 mm; seal type:Single Lip Contact; mounting type:Four-Bolt Flange; application brochure:Click here; d:40 mm; manufacturer catalog:Click here; operating temperature range:30 to 180°F; lubrication type:Lubrication Fitting; bore type:Round; housing material:Nolu®-Clean; bearing material:52100 Chrome Steel; bolt size:0.5469 in; |
| 577796 Thrust Roller Bearings | bore type:Round; housing material:Cast Iron - Nickel P; expansion type:Non-Expansion Bearin; replacement bearing:UC208-24MZ2RF; d:1.5000 in; radial dynamic load capacity:6590 lbf; duty type:Standard Duty; seal type:Dual Lip with Slinge; length through bore:1.937 in; radial static load capacity:4020 lbf; locking device:Set Screw; lubrication type:Lubrication Fitting; mounting type:Four-Bolt Flange; |
HM265049TD/1 Cam Follower And Track Roller Video
Angular contact ball bearings - SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that
Angular Contact Ball Bearings | The Timken Company
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular contact ball bearings | SKF
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
Angular Contact Ball Bearings - an overview | ScienceDirect
In angular contact ball bearings the line of action of the load, at the contacts between balls and raceways, forms an angle with the bearings axis. The inner and