No. | Brand | a | D | B | C | d | da | Dx | r1 |
A16-79P1A | Rotek | - | - | - | - | - | - | - | - |
A10-47E1 | Rotek | - | - | - | - | 1.6875 in | - | - | - |
A4-23P2A | Rotek | - | - | - | - | - | - | - | - |
M4-16P4 | Rotek | - | 400 mm | 65 mm | - | 260 mm | - | - | 4 mm |
A14-43P1 | Rotek | - | 140 mm | 48 mm | - | 65 mm | - | - | 2.1 mm |
A14-54N10C | Rotek | - | - | - | - | - | - | - | - |
RKS.062.25.1424 | SKF | - | 72.0000 mm | 27.00 mm | - | 30.000 mm | - | - | - |
RKS.160.16.1754 | SKF | - | 72.0000 mm | 19.00 mm | - | 30.000 mm | - | - | - |
R8-30N3 | Rotek | - | - | - | - | 1.1875 in | - | - | - |
L6-33P9ZD | Rotek | - | 110.0000 mm | 54.00 mm | - | 50.000 mm | - | - | - |
L9-42P9Z | Rotek | - | 30 mm | 9 mm | - | 10 mm | - | - | - |
L6-37N9ZD | Rotek | - | 200.0000 mm | 33.00 mm | - | 130.000 mm | - | - | - |
L6-43P9Z | Rotek | - | 380 mm | 75 mm | - | - | - | - | 4 mm |
A8-39E12 | Rotek | - | 80.0000 mm | 34.90 mm | - | 35.000 mm | - | - | - |
A18-60E2 | Rotek | - | 180 mm | 34 mm | - | 100 mm | - | - | - |
L6-37N9Z | Rotek | - | 150.0000 mm | 24.00 mm | - | 100.000 mm | - | - | - |
3R13-62N1E | Rotek | - | 215.0000 mm | 22.00 mm | - | 170.000 mm | - | - | - |
3R6-63N9 | Rotek | - | 110.0000 mm | 44.40 mm | - | 50.000 mm | - | - | - |
L9-38E9Z | Rotek | - | 280 mm | 46 mm | - | 180 mm | - | - | 2.1 mm |
A10-35P1A | Rotek | - | 80 mm | 21 mm | - | 35 mm | - | - | 1.1 mm |
A16-79P1A Rotek Slewing Ring Bearings | Bearing Bore Shape:Round; Retainer Type:Std Retainer; Bearing Locking Device:Setscrew; Housing Type:Flange Bracket; Bearing Series:210 Series; Housing Coating:Powder Coat; Shaft Attachment (2):Set Screw; Flinger Material:Steel; End Cap Groove:No; Bearing Outer Ring Material:Steel; Bearing Insert Material:Steel; Bearing Inner Ring Material:Steel; Manufacturing Plant Location:Rogersville, TN; Anti-Rotation Pin:Yes; |
L4-17P8ZD Rotek Slewing Ring Bearings | ra (max):6 mm; D:1280 mm; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y0:3.20; da (min):936 mm; Fillet Radius/Chamfer:7.5 mm; B:280 mm; Retainer Material:Machined Brass; Bore Type:Tapered Bore; Da (max):1244 mm; Nr. of Holes:8; Radial Clearance:0.640 to 0.840 mm; Groove Width A:45 mm; Limiting Speed - Oil:330 rpm; Enclosure:Open; Hole Diameter (do):20 mm; Dynamic Load Rating:14,600,000 N; |
RKS.060.25.1534 SKF Slewing Ring Bearings | Ship Weight:59.02 LB; Bearing Bore Shape:Tapered; Seal Type:Triple Lip; Grease Type:Mobilgrease XHP222; Expansion Type:Non-Expansion; UPC:782475697816; Housing Series:315 SERIES (315 - 40; Housing Type:Top Angle Take-Up; Shaft Attachment Type:SETSCREW; Bearing Insert Material:Steel; Bearing Locking Device:Setscrew; Split Housing:NO; Setscrew Angle:65; d:3.9375 in; Housing Product Type:TYPE E; Bearing Series:315 Series; |
A16-67P2 Rotek Slewing Ring Bearings | Bearing Inner Ring Material:Steel; Bearing Insert Material:Steel; Ball Grade:Class 10; Max Bearing Speed:5000 rpm; Retainer Type:Std Retainer; Manufacturing Plant Location:Rogersville, TN; Housing Coating:Powder Coat; Housing Material:Cast Iron; Bearing Outer Ring Material:Steel; Bearing Duty:Intermediate Duty; Bearing Family:Eccentric Collar Bal; Ball Material:Steel; Shaft Attachment (2):Eccentric Collar; |
L6-22N9Z Rotek Slewing Ring Bearings | Limiting Speed - Grease:9,800 rpm; b (min):1.9 mm; Snap Ring Outside Diameter:78.6 mm; r1:0.5 mm; Static Load Rating:15,300 N; Fillet Radius/Chamfer:1.1 mm; B:17 mm; Enclosure:Single Shield with S; Limiting Speed - Oil:11,000 rpm; Da (max):65 mm; Dynamic Load Rating:25,700 N; ra (max):1 mm; a (max):3.3 mm; da (min):42 mm; Dx (min):80 mm; Factor fo:13.8; D:72 mm; Radial Clearance:0.015 to 0.033 mm; |
W13-43P2 Rotek Slewing Ring Bearings | ra (max):0.6 mm; Enclosure:Single Shield with S; Da (max):96 mm; Radial Clearance:0.025 to 0.051 mm; Fillet Radius/Chamfer:0.6 mm; D1 (max):97.9 mm; a (max):1.7 mm; Dynamic Load Rating:12,700 N; Limiting Speed - Oil:7,100 rpm; Static Load Rating:13,300 N; d:80 mm; Limiting Speed - Grease:6,000 rpm; b (min):1.3 mm; Factor fo:15.9; Weight:0.160 kg; Cy (max):2.5 mm; Bore Type:Cylindrical Bore; D:100 mm; |
L6-29N9Z Rotek Slewing Ring Bearings | Nr. of Holes:6; da (min):152 mm; Fillet Radius/Chamfer:2.1 mm; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y0:1.83; Enclosure:Open; Static Load Rating:1,030,000 N; B:85 mm; D:225 mm; Dynamic Load Rating:930,000 N; Configuration:Double Row; Axial Load Factor Y1:1.87; ra (max):2 mm; Bore Type:Tapered Bore; d:140 mm; Retainer Material:Pressed Brass; Limiting Speed - Oil:2,800 rpm; Groove Width A:14 mm; |
A12-42E3 Rotek Slewing Ring Bearings | a (max):3.7 mm; Groove Width:3.5 mm; D:180 mm; Limiting Speed - Oil:4,300 rpm; ra (max):2 mm; r1:0.5 mm; Dx (min):195 mm; Factor fo:15.7; B:28 mm; Radial Clearance:0.036 to 0.066 mm; Dynamic Load Rating:88,000 N; Weight:2.360 kg; Bore Type:Cylindrical Bore; Da (max):172 mm; Fillet Radius/Chamfer:2 mm; Configuration:Single Row; Groove Diameter:173.7 mm; d:120 mm; Static Load Rating:79,500 N; Enclosure:Open; |
M5-40P1 Rotek Slewing Ring Bearings | Limiting Speed - Grease:3,500 rpm; d:130 mm; Static Load Rating:67,000 N; Dynamic Load Rating:65,000 N; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:1.7 mm; B:24 mm; Enclosure:Single Shield with S; Bore Type:Cylindrical Bore; ra (max):1.5 mm; b (min):1.9 mm; Da (max):173 mm; Configuration:Single Row; Snap Ring Outside Diameter:186.5 mm; Cy (max):5.1 mm; r1:0.5 mm; a (max):3.7 mm; D:180 mm; Radial Clearance:0.041 to 0.081 mm; |
3R6-71N9 Rotek Slewing Ring Bearings | Dynamic Load Rating:23,600 N; Limiting Speed - Oil:14,000 rpm; Static Load Rating:12,100 N; Da (max):55 mm; Limiting Speed - Grease:12,000 rpm; Radial Clearance:0.013 to 0.028 mm; Fillet Radius/Chamfer:1.1 mm; D:62 mm; B:17 mm; Configuration:Single Row; Weight:0.232 kg; Enclosure:Open; d:25 mm; da (min):32 mm; Factor fo:12.2; ra (max):1 mm; Bore Type:Cylindrical Bore; |
3R6-71P9 Rotek Slewing Ring Bearings | Basic Static Radial Load Rating Co:106000 N; D:120.0000 mm; d:65.000 mm; Oil Speed Rating n2:4800 rpm; Grease Speed Rating n1:3600 rpm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:88000 N; B:38.10 mm; Accessories:Two Shields & Snap-R; Sealed Speed Rating n3:3600 rpm; |
R9-67E3 Rotek Slewing Ring Bearings | Retainer Type:Max Life Cage; Shaft Attachment (2):Set Screw; Bearing Bore Shape:Round; Grease Type:Mobilgrease FM222; Flinger Type:INTERNAL RUBBER LIP; d:1.1875 in; Flinger Material:Stainless Steel; Seal Type:Triple Lip; Bearing Series:206 Series; Retainer Material:Polymer; Manufacturing Plant Location:Rogersville, TN; Housing Coating:No Coating; Bearing Inner Ring Material:Steel; Bearing Locking Device:Setscrew; |
RKS.161.16.1534 SKF Slewing Ring Bearings Video
bearing with out gears (rks. 161.16.1534)
2010101- Type: Slewing Bearing Brand Name: Raphael Bore internal gears or external gears, lubricant holes RKS.161.16.1424 RKS.161.16.1534 RKS
Slewing Ring Bearing RKS.161.16.1534 Suppliers and
High in quality and precision, reliable in stability, and long in lifespan, this slewing ring bearing rks.161.16.1534 of Sun Rises has already been sold to the
China Production Rks. 161.16.1534 Type High Load Slewing
China Production Rks. 161.16.1534 Type High Load Slewing Bearing, Find details about China Ball Bearing, Rolling Bearing from Production Rks. 161.16.1534
RKS.161.16.1534 With external gear - JCB Bearing
Page 1. Luoyang JCB Bearing Technology Co., Ltd
RKS.161.16.1534 Crossed Cylindrical Roller Slewing Bearing Price
Dismounting bearings RKS.161.16.1534 Crossed Cylindrical Roller Slewing Bearing Pricemounted on either adapter or withdrawal sleeves is also often a
Cross Roller Slewing Bearing with out Gears (RKS. 161.16.1534)
China Cross Roller Slewing Bearing with out Gears (RKS. 161.16.1534), Find details about China Slewing Bearing, Slewing Ring from Cross Roller Slewing
RKS.161.16.1534 of RKS slewing bearing from China Suppliers
Quality RKS.161.16.1534 - find quality RKS slewing bearing, Slewing Bearings & RKS slewing bearing from Luoyang JCB Bearing Company of China Suppliers