Plain Sleeve Thrust Washers
It is manufactured using the powdered metal process with the purest metal powders. This process ensures the uniform distribution of pores between the bronze particles which absorb the oil by capillary action. In addition, Bost-Bronz® has a self-contained oil supply (approximately 20% by volume) which provides a uniform protective film over the entire bearing surface. As a result, bearings are one of the most effective bearings available for precision performance.
bearings are also highly versatile and can be used for production and replacement requirements throughout general industry. They have proven to be efficient under heavy loads at moderate speeds, as well as under light loads at high speeds. In addition, they are ideally suited for applications where normal lubrication is difficult or impossible to provide.
- Koyo NRB TRA-4052;PDL125 Plain Sleeve Thrust Washers
- 6 mm
- 121.5 mm
- Koyo NRB TRA-3648;PDL125 Plain Sleeve Thrust Washers
- PA212N-
- 60 mm
- Koyo NRB TRA-1625;PDL051 Plain Sleeve Thrust Washers
- 3.51 kg
- 110 mm
- Koyo NRB TRA-1423;PDL125 Plain Sleeve Thrust Washers
- 14 kN
- 76.2 mm
- Oiles 30W-4007 Plain Sleeve Thrust Washers
- 49.3 mm
- 69.9 mm
- Oiles 30W-2505 Plain Sleeve Thrust Washers
- 587 mm
- 4864 kN
- Oiles 30W-3505 Plain Sleeve Thrust Washers
- 10 mm
- 35 mm
- Oiles 30W-2005 Plain Sleeve Thrust Washers
- -20 °C
- 0.9 kg
- Oiles 30W-1603N Plain Sleeve Thrust Washers
- 39 mm
- 103 mm
- Oiles 30W-1303N Plain Sleeve Thrust Washers
- 0.53 kg
- F204-
- Oiles 30W-1203N Plain Sleeve Thrust Washers
- 0.02 kg
- 18 mm