Plain Sleeve Thrust Washers
It is manufactured using the powdered metal process with the purest metal powders. This process ensures the uniform distribution of pores between the bronze particles which absorb the oil by capillary action. In addition, Bost-Bronz® has a self-contained oil supply (approximately 20% by volume) which provides a uniform protective film over the entire bearing surface. As a result, bearings are one of the most effective bearings available for precision performance.
bearings are also highly versatile and can be used for production and replacement requirements throughout general industry. They have proven to be efficient under heavy loads at moderate speeds, as well as under light loads at high speeds. In addition, they are ideally suited for applications where normal lubrication is difficult or impossible to provide.
- Symmco ST-3252-8 Plain Sleeve Thrust Washers
- 48.4 mm
- 200 °C
- Oilite TT1503- Plain Sleeve Thrust Washers
- 61 mm
- 140 mm
- Oilite TT1603- Plain Sleeve Thrust Washers
- 0.17
- 0.169
- Oilite TT1701- Plain Sleeve Thrust Washers
- Ball
- 2.5 mm
- Symmco ST-2444-8 Plain Sleeve Thrust Washers
- 6.65 kN
- 17 mm
- Symmco ST-2038-2 Plain Sleeve Thrust Washers
- 222 kN
- 334 kN
- Symmco ST-5078-4 Plain Sleeve Thrust Washers
- 49.2 mm
- 100 °C
- Symmco ST-5684-4 Plain Sleeve Thrust Washers
- T213-
- 26 mm
- Symmco ST-3660-4 Plain Sleeve Thrust Washers
- 150 mm
- 19 mm
- Oilite TT709-01 Plain Sleeve Thrust Washers
- Ball
- ABEC 1 | ISO P0
- Symmco ST-6284-4 Plain Sleeve Thrust Washers
- 5.5 Nm
- 100 °C