L S Starrett BEARING COMPANY

Drill Rod Bearings

To provide a longer stroker crank that has more strength than the stock VW forging or any other aftermarket forged crankshaft, the 411 center main journal is required. For that reason all of the "Berg" forged cranks are made with the 411 center main to provide a stronger cross sectional area at the center journal. To maintain proper case strength, I use a special adapter bearing (GB 157) that fits the stock case and this larger crankshaft main journal. It is a steel backed bearing, as was the one it replaced, leaving the regular (steel back) split #2 main bearing as an extra. Gary, has been installing these split #2 bearings in the #3 location for years on all engines that use a 411 center main bearing crankshaft, having the round #3 bearing as the leftover. This requires adding a dowel hole in the other half of most cases at the #3 location so it will accept the dowel. A few cases have this dowel hole from the factory, but it is likely you will need to add the hole. Gary made a drill fixture by drilling through the pin hole in an old #2 split bearing, installing that bearing in the case and drilling a pin hole about a 1/4" deep into the case at the #3 location.
Extremely simple! This provides much stronger case and crankshaft support when using the split steel backed bearings in both #2 and #3 locations. Furthermore, it is no longer necessary to remove or replace the cam/distributor drive gears from the crankshaft when working on the engine or changing main bearings. See LA CASE030 for adding dowel hole.

Precision Brand 28042 Drill Rod Bearings
3-1/2 in
Spherical Roller
Precision Brand 28050 Drill Rod Bearings
15-1/16 in
2 in
Precision Brand 28034 Drill Rod Bearings
SAE 841
5/16 in
Precision Brand 28040 Drill Rod Bearings
0.02 KGS
Plastic
Precision Brand 28045 Drill Rod Bearings
C3
2.5
Precision Brand 28036 Drill Rod Bearings
Inner Ring
3625031101
Precision Brand 28039 Drill Rod Bearings
3610011001
15 mm
Precision Brand 28038 Drill Rod Bearings
Rubber
500
Precision Brand 28035 Drill Rod Bearings
1.75 Inch
mjt4.1/4-rhp
Precision Brand 28030 Drill Rod Bearings
Click here
Plain Sleeve
Precision Brand 28027 Drill Rod Bearings
13mm
8
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Cored Bar Stock
Die & Mold Plain-Bearing Bushings
Drill Rod Bearings
Flat Bar Stock Bearings
Keystock Bearings
Plain Sleeve & Flanged Bearings
Plain Sleeve Thrust Washers
Solid Bar Stock Bearings
Spherical Plain Bearings
Take-Up Ball Bearing Units
Take-Up Roller Bearing Units
Wear Strips & Wear Plates
ntn 6206z Bearing
sy510 Bearing
uj10430 Bearing
skf h316 Bearing
Bearing Slewing Ring
Large Slewing Bearings
Slewing Ring Bearings
Kaydon Slewing Bearing
Super Precision Bearing
Super Precision Angular Contact Bearings
Super Precision Bearings
Slewing Ring
Tapered Roller Bearings
Four-Row Tapered Roller Bearing
Cylindrical Roller Bearing
Double Row Tapered Thrust Roller Bearings
Railway Rolling Spherical Roller Bearings
Angular Contact Ball Bearings
Ribbed Belts
Gates Poly Chain Gt Carbon
T215rb Belts
Powerband Belt
Gates Racing Timing Belt